Easun Power Solar Inverter 11.2KW/11200W MPPT Pure Sine Wave 500VDC 60A

Easun Power 11.2KW/11200W Solar Inverter MPPT Pure Sine Wave 500VDC 60A Solar Charge Controller 24V 220V 50Hz/60Hz Off Grid Inverter With Wifi Module

Adopt full digital voltage and current double closed-loop control and advancedSPWM technology to output pure sine wave.
Two output modes, i.e. mains bypass and inverter output can achieveuninterrupted power supply function.
Four optional charge modes: only solar energy, mains priority, solar energypriority and mixed charge.
Advanced MPPT technology, with efficiency up to 99.9%.
Wide MPPT voltage range.
With function of activating lithium battery with solar energy and AC mainspower, it supports connection of lead-acid battery and lithium battery.
LCD screen design and 3 LED indicator lights dynamically display systemdata and operation states.
ON/OFF rocker switch can control AC output.
With power saving mode function, it can reduce no-load loss.
Intelligent adjustable speed fan is adopted for efficient heat dissipation andextended system life.
Possessing multiple protection functions and 360°comprehensive
Possessing complete short circuit protection, overvoltage and undervoltageprotection, overload protection, back filling protection, etc.
It has the function of mixed load: when the battery is not connected,photovoltaic and commercial power can supply power to the load at the same time (if there is no battery, the commercial power must be connected). When the battery is full, it can also enter the mixed load mode, which can make full use of the photovoltaic energy.
WIFI included

Models	ISolar-SMX-II-3.6KW	ISolar-SMX-II-5.6KP
AC mode
Rated input voltage	220/230Vac
Input voltage range	(170Vac~280Vac) ±2%；(90Vac-280Vac)±2%
Frequency	50Hz/ 60Hz (Auto detection)
Frequency Range	47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection	Circuit breaker
Efficiency	>95%
Conversion time (bypass and inverter)	10ms (typical)
AC reverse protection	Available
Maximum bypass overload current	30A	40A
Inverter mode
Output voltage waveform	Pure sine wave
Rated output power (VA)	3600	5600
Rated output power (W)	3600	5600
Power factor	1	1
Rated output voltage (Vac)	230Vac	230Vac（200/208/220/240Vac settable）
Output voltage error	±5%
Output frequency range (Hz)	50Hz ± 0.3Hz/60Hz ± 0.3Hz	50Hz ± 0.3Hz/60Hz ± 0.3Hz
Efficiency	>92%	>90%
Peak power	6000VA	10000VA
Loaded motor capability	2HP	4HP
Output short circuit protection	Circuit breaker	Circuit breaker
Bypass breaker specifications	30A	40A
Rated battery input voltage	24V (Minimum starting voltage 22V)	48V (minimum start voltage 44V)
Battery voltage range	20.0Vdc~33Vdc ± 0.6Vdc (Undervoltage alarm/shutdown voltage overvoltage alarm /overvoltage recovery… settable on LCD screen)
Power saving mode	Load ≤50W
AC charging
Battery type	Lead acid or lithium battery
Maximum charge current	80A	60A
Charge voltage range	20.0Vdc~33Vdc	40~60Vdc
Short circuit protection	Circuit breaker and blown fuse	Breaker and blown fuse
Circuit breaker specifications	30A	40A
Overcharge protection	Alarm and turn off charging after 1 minute
PV charging
Maximum PV open circuit voltage	500Vdc	500Vdc
PV operating voltage range	120-500Vdc	120-500Vdc
MPPT voltage range	120-450Vdc	120-450Vdc
Battery voltage range	20-33Vdc	40-60Vdc
Maximum intput power	4000W	6000W
PV charging current range (can be set)	0-80A	0-80A
Charging short circuit protection	Blown fuse	Blown fuse
Wiring protection	Reverse polarity protection	Inverse wiring protection
Certified specifications
Certification	CE(IEC 62109-1)
EMC certification level	EN61000, C2
Operating temperature range	-15°C to 55°C
Storage temperature range	-25°C ~ 60°C
Humidity range	5% to 95% (Conformal coating protection)
Noise	≤60dB
Heat dissipation	Forced air cooling, variable speed of fan
Communication interface	USB/CAN/RS485(WiFi/GPRS)/Dry node control
Size (LWD)	378mm280mm103mm	426mm322mm126mm
Weight (kg)	6.9	10.9